How to Open / Take Apart a Western Digital Elements Hard Drive Case

Recently I decide to add more space to my server. For some reasons, the internal hard drives are always more expensive than the external one, even the hard drives are exact the same thing. So I decide to buy an external hard drives first, and disassemble the case and take the hard drive out. I guess Western Digital doesn’t want you to do it, so there is no easy way to open the case. In fact, it is pretty easy to take out the hard drive without breaking the case. And I am going to show you how to open the Western Digital Elements hard drive case. The whole process should take no more than 5 minutes.

Open a Western Digital Elements Hard Drive Case:

Step 1 – Get the Tools Ready

You don’t need any fancy tool to get the job done. Simply use a precision screw driver such as 1/32″ flat and a regular Philip screw driver (PZ1) are enough.

Open a Western Digital Elements Hard Drive Case

Open a Western Digital Elements Hard Drive Case:

Step 2 – Knowing the Plan

Since Western Digital uses a self-snapping cover to snap on the case, it is good to know where are these clips.

Open a Western Digital Elements Hard Drive Case

Open a Western Digital Elements Hard Drive Case:

Step 3 – Open the Case

After knowing the locations of these clips, simply use a screw driver to open the case carefully on these locations.

Open a Western Digital Elements Hard Drive Case

Open a Western Digital Elements Hard Drive Case:

Step 4 – Almost Done

After removing the cover, you will see something like this. Unscrew the 4 circled screws with the Phillip screw driver and take out the hard drive very carefully.

Open a Western Digital Elements Hard Drive Case

Open a Western Digital Elements Hard Drive Case:

Step 5 – Remove the Connectors and Protections

We are almost there. All you need to do is to remove the blue protections and the circuit board.

Open a Western Digital Elements Hard Drive Case

Open a Western Digital Elements Hard Drive Case:

Step 6 – Completed!

Now the hard drive is ready. Simply snap it into your desktop and it is ready to go!

Open a Western Digital Elements Hard Drive Case

Open a Western Digital Elements Hard Drive Case:

The Adapter

Now you have an extra USB-SATA adapter available. You can simply build you own Lego SATA enclosure with it. However, keep in mind that it only works with Western Digital hard drives. If you plug in a non-Western Digital hard driver such as Seagate, it won’t recognize it at all.

Open a Western Digital Elements Hard Drive Case

Updated on June 25, 2023

WD is doing something weird to their hard drives since 8TB. You can’t directly plug the WD hardrive to your power supply. There are three methods:

1.) Tape or strip out the connector on the power port to disable the 3.3V pin. Google: “How to disable the 3.3v pin on Western Digital USB White Label Drives”. Personally I think this is a bit unreliable (if you tape to cover the connector) or risky (if you strip out the connector)

2.) Use a “SATA to PATA power converter” and “PATA to SATA power converter”, i.e., Power supply -> SATA to PATA power converter -> PATA to SATA power converter -> Hard Drive. You can find them on Amazon.

3.) If you use server grade components, such as Dell PowerEdge servers, typically it comes with a hard drive bay, i.e., it comes with a hard drive enclosure and you need to slide your hard drives into the big box. The big box contains everything including the data and power supply. Based on my experience, it works great with the new WD hard drives.

4.) Get a power supply that work with WD hard drive. Some people say Consair works with the WD hard drive. I have exact the same model but I can’t get it work.

Have fun.

–Derrick

Our sponsors:

12 Replies to “How to Open / Take Apart a Western Digital Elements Hard Drive Case”

  1. steve

    Good clear post. My drive was cold stone dead this morning. No more Western Digital Elements for me. I was in luck though. Pulled the drive and I had an enclosure kicking around and the drive was live and well. Must have been something that died on the enclosure. I tested it with another Elements power adapter to make sure. It gave a one light flash and then nothing. Anyhow, I appreciate your post. With the small screw driver it came apart surprisingly easily.

    Reply
  2. dominik

    hey everybody
    i have such a hard drive myself and the usb port broke
    now im searching for a board like the one in the last picture to replace the old one. if anyone knows whats the name of such a thing or where i can get it please help!!

    Reply
  3. rayrrod

    I too am in the same situation as you dominik
    Any responses?
    Drive works .sometimes and have copied all data to another drive.
    Would like to not junk this 1TB drive. When I connect a mirco usb cable, the cable rocks sideways. So sometimes the hd works, sometimes it does not.

    Reply
  4. Wally

    I was able to open my drive of this type and it read a Seagate drive just fine. But my internal board looked a little bit different, so maybe my model (P/N WDBAAU0010HBK-00) is different from yours?

    Reply
  5. darryl

    I have a few bad sectors that WD Data Lifeguard wrote, erased, etc. and even after formatting, data writes onto those sectors, whether good or bad. What I would like to ask is, can the 2TB drive be replace with another WD drive in a larger capacity, like a 4TB, 6TB, etc.?

    Reply
    • Derrick Post author

      Short answer: Yes.

      Long answer: depends.

      Assuming that you are simply using your drive via external USB, no RAID, no mirror or anything fancy, then you should be good. If you are using it as an internal laptop hard disk, things can be tricky because 4TB (or larger capacity) hard drives are taller than a 2TB (or smaller capacity). It may be too tall to close the cover.

      Reply
  6. Louis Windsor

    Sorry to say but in July 2020 this information is no longer correct 🙁
    The Disk Management Tool no longer recognizes a WD Elements drive removed from it’s enclosure 🙁

    Reply
    • Derrick Post author

      WD is doing something funny to their hard drives since 8TB. You can’t directly plug the WD hardrive to your power supply. There are three methods:

      1.) Tape or strip out the connector on the power port to disable the 3.3V pin. Google: “How to disable the 3.3v pin on Western Digital USB White Label Drives”. Personally I think this is a bit unreliable (if you tape to cover the connector) or risky (if you strip out the connector)

      2.) Use a “SATA to PATA power converter” and “PATA to SATA power converter”, i.e., Power supply -> SATA to PATA power converter -> PATA to SATA power converter -> Hard Drive. You can find them on Amazon.

      3.) Get a power supply that work with WD hard drive. Some say Consair works with the WD hard drive. I have exact the same model but I can’t get it work.

      Reply
  7. Jerome

    Hello there,

    After taking out the HD. Can I just buy a dock that supports both 2.5 & 3.5 to access the drive instead of buying a USB-SATA enclosure? I have 2 of these HDs that I want to run.

    Thanks

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *